Fritz app for Android
by Volker Weber
If you have both a Fritz!Box router and an Android phone, here is a little app for you. While you are connected to your home WLAN, the app connects your phone to a SIP proxy inside the Fritz!Box so that you can receive landline or VoIP calls to your home on your mobile phone. It also lets you place calls through both VoIP and landline via the Fritz!Box. Download here:
You will have to allow software installs from other locations than the Market. The app is available from Fritz!Labs and it is still kind of shaky. The process terminates once in a while and voice quality has not always been sufficient in my early tests. But it's a good start, and it should become really useful if you can connect through 3G when not at home. That should be possible through dynamic DNS.
Comments
Nicht nur für Android, auch für iPhone verfügbar laut der Pressemitteilung - oder habe ich wieder ein wichtiges Detail übersehen?
Klar. Den Link.
Mangels Android nahm ich nur den More-link. Und da steht auch iPhone. :(
Eigentlich kann man doch auch eine andere SIP-Anwendung verwenden, oder sehe ich das falsch? Was ist denn nun daran so spektakulär neu? :)
@Daniel:
Die gleiche Frage stelle ich mir grad eben auch.
@Daniel: Dein Android oder iPhone verhält sich damit wohl genau so wie z.B. ein DECT-Schnurlostelefon oder ein per Kabel an die FritzBox angeschlossenes. Wenn ich das richtig verstanden habe. Muss also kein VoIP, kann auch normales Festnetz (wenn es so etwas noch gibt) sein.
Was Daniel meint, habe ich mich auch schon gefragt, aber nicht probiert. So wie ich das verstehe, nutzt die Fritz-App SIP zwischen dem Android und der Fritzbox. Wenn AVM da keine "Schweinereien" eingebaut hat, dann sollte das auch mit einer anderen SIP-Anwendung funktionieren, und das werde ich dann mal probieren. :-)
Das dürfte dann so ziemlich mit jedem Nokia-SIP-client out-of-the-box funktionieren, wenn es denn sich wirklich "nur" um einen SIP-Proxy handelt. Weitergehende Infos müssten AVM-User bereitstellen, zu denen ich nicht gehöre.
Confirmed. This works with the SIP client in the N900. Just add a new phone to the Fritz!Box, type LAN/WLAN. Use the number, usually 620 for the first phone and the password you assign. Your username is 620@fritz.box.
Irre ich mich wenn ich denke, dass die Iphone App eher unsinnig sein dürfte auf Grund fehlenden Multitasking??